Light Fixtures

CRW provides Versa-Clean, Teardrop or Flow-thru light fixtures for every application. All fixtures are sealed to maintain required pressure.

• 20-gauge Cold Rolled Steel
• Square sided fixture
• Neoprene gasketing
• Clear, prismatic lens at 0.125″ standard
• 120 or 277 volt standard

Available in fluorescent T5 and T8 or long-life LED with high efficiency drivers.

• 1′ X 4′ With 2 Bulbs
• 2′ X 2′ With 2 Bulbs
• 2′ X 4′ With 2, 3, Or 4 Bulbs
• 6′ X 4′ With 2 Bulbs

• Galvanized reinforced steel housing tested to 200 lbs walk-on-load
• Top panel flips open 180 degrees for ease of maintenance
• Two safety rails to prevent fall through when top panel is open for maintenance
• 2”, 3” and 5” ceiling panel thickness available
• Available in Fluorescent T8 and T5 or LED
• Neoprene gasketing
• Clear, prismatic lens at 0.125” standard
• 120 or 277 volt standard
• UL Listed

• 1’ X 4’
• 2’ X 2’
• 2’ X 4’

• Teardrop design minimizes air flow disruption
• Mounts conveniently on T-bar
• Milk white acrylic lens with internal linear prism
• Clear acrylic lens (optional)
• Lens easily removes for lamp maintenance
• Available with trigger start, rapid start & bi-axial lamps
• Tested to meet Class 100 (ISO 5) standard
• Tested to meet Class 1 (ISO 3) optional

• 24″ With 1 Bulb
• 48″ With 2 Bulbs
• 36″ With 1 Bulb
• 72″ With 2 Bulbs
• 48″ With 1 Bulb
• 96″ With 2 Bulbs
• 60″ With 1 Bulb

• Extruded aluminum door frame with mitered corners
• 1/2” x 1/2” white plastic louver
• Air flows through top mounted filter
• Open top unit allows for easy replacement of filters
• Compatible with most T-bar systems